← M408M Week 9: Arc Length, Curvature & Motion
M408M · Week 9 Stewart §13.3–13.4

Arc Length, Curvature & Motion

Outline

  1. 1Arc length, the arc length function, and reparametrization
  2. 2Curvature and the osculating circle
  3. 3The $\mathbf T\mathbf N\mathbf B$ frame and osculating plane
  4. 4Velocity, speed, and acceleration
  5. 5Recovering motion from acceleration
  6. 6Tangential and normal acceleration
  7. 7Exercises
§13.3 · Arc length

Arc length of a space curve

To find the length of a curve $C$, integrate the magnitude of its tangent vector over the parameter interval.

$$\begin{aligned}L=\int_a^b |\mathbf r'(t)|\,dt&=\int_a^b\sqrt{[f'(t)]^2+[g'(t)]^2+[h'(t)]^2}\,dt\\[4pt]&=\int_a^b\sqrt{\Big(\frac{dx}{dt}\Big)^2+\Big(\frac{dy}{dt}\Big)^2+\Big(\frac{dz}{dt}\Big)^2}\,dt\end{aligned}$$

Here $\mathbf r(t)=\langle f(t),\,g(t),\,h(t)\rangle$ traces $C$ once as $t$ increases from $a$ to $b$.

Example: one turn of the circular helix

Find the length of the arc of $\mathbf r(t)=\langle\cos t,\ \sin t,\ t\rangle$ from $(1,0,0)$ to $(1,0,2\pi)$.

  1. Endpoints $(1,0,0)$ and $(1,0,2\pi)$ have $z=t$, giving $0\le t\le 2\pi$.
  2. $$\mathbf r'(t)=\langle-\sin t,\ \cos t,\ 1\rangle$$
  3. $$|\mathbf r'(t)|=\sqrt{(-\sin t)^2+\cos^2t+1^2}=\sqrt2$$
$$L=\int_0^{2\pi}|\mathbf r'(t)|\,dt=\int_0^{2\pi}\sqrt2\,dt=2\sqrt2\,\pi$$

Drag to rotate · double-click to reset

§13.3 · Arc length function

The arc length function $s(t)$

$s(t)$ is the distance traveled along $C$ from the starting point $\mathbf r(a)$ up to the point $\mathbf r(t)$, like an odometer reading.

Definition

Use the arc length formula with the upper limit $b$ replaced by a variable $t$:

$$s(t)=\int_a^t |\mathbf r'(u)|\,du$$

By the Fundamental Theorem of Calculus:

$$\frac{ds}{dt}=|\mathbf r'(t)|$$

If $t$ is time, the distance traveled grows at a rate equal to the speed.

Example: helix $\mathbf r(t)=\langle\cos t,\ \sin t,\ t\rangle$ from $(1,0,0)$

The speed is $|\mathbf r'(t)|=\sqrt2$ for every $t$, so

$$s(t)=\int_0^t\sqrt2\,du=\sqrt2\,t$$
Time $t$Distance traveled $s(t)$
$0$$0$
$\pi$$\sqrt2\,\pi\approx 4.44$
$2\pi$$2\sqrt2\,\pi\approx 8.89$ (one full turn, as on the previous slide)

Constant speed means the distance grows at a constant rate: $\sqrt2$ units per unit of time.

§13.3 · Arc length parametrization

Reparametrizing by arc length

Label each point of $C$ by its distance $s$ from the starting point instead of by the time $t$. The curve stays the same; only the labels change.

Same labels for any speed
Every parametrization that traces $C$ once gives each point the same distance label $s$. It depends only on the shape of $C$.
Unit speed
Increasing $s$ by $\Delta s$ moves exactly $\Delta s$ along $C$, so $|d\mathbf r/ds|=1$. This is why curvature (next slide) is measured per unit of $s$: turning per unit distance, not per unit time.

Example: the helix from $(1,0,0)$

  1. Find the distance traveled: $s=\sqrt2\,t$.
  2. Solve for $t$: $\;t=\dfrac{s}{\sqrt2}$.
  3. Substitute into $\mathbf r(t)$:
    $$\mathbf r\big(t(s)\big)=\Big\langle\cos\frac{s}{\sqrt2},\ \sin\frac{s}{\sqrt2},\ \frac{s}{\sqrt2}\Big\rangle$$

Plugging in $s=3$ gives the point exactly $3$ units along the helix from $(1,0,0)$.

§13.3 · Curvature

Curvature: how fast the direction turns

Move along $C$ and watch the unit tangent vector $\mathbf T$ (the direction of motion). Curvature is the angle that $\mathbf T$ turns per unit of distance traveled.

Travel a distance $\Delta s$ from $P$ to $Q$, and let $\Delta\theta$ be the angle between $\mathbf T$ at $P$ and $\mathbf T$ at $Q$:

$$\kappa=\lim_{\Delta s\to 0}\frac{\Delta\theta}{\Delta s}\qquad(\text{radians per unit length})$$

Since $|\mathbf T|=1$, turning by a small angle $\Delta\theta$ changes $\mathbf T$ by $|\Delta\mathbf T|\approx\Delta\theta$. So $\kappa=|d\mathbf T/ds|$.

Examples and the osculating circle

Straight line
The direction never changes, so $\kappa=0$.
Circle of radius $a$
One lap has length $2\pi a$ and turns the direction by $2\pi$, so $\kappa=\dfrac{2\pi}{2\pi a}=\dfrac1a$. Smaller circles turn faster.
Osculating circle
At a point $P$, the circle with the same tangent line and the same curvature as $C$. Its radius is $\rho=\dfrac1\kappa$.
§13.3 · Computing curvature

Computing curvature

The definition $\kappa=|d\mathbf T/ds|$ uses arc length $s$, but curves are usually given with a parameter $t$. Two formulas work directly with $t$.

Formula 1: from $\mathbf T'(t)$

  1. Chain Rule ($\mathbf T$ depends on $s$, $s$ on $t$): $\;\dfrac{d\mathbf T}{dt}=\dfrac{d\mathbf T}{ds}\cdot\dfrac{ds}{dt}$.
  2. Take lengths: $|\mathbf T'(t)|=\kappa\,|\mathbf r'(t)|$, since $|d\mathbf T/ds|=\kappa$ and $ds/dt=|\mathbf r'(t)|$.
    $$\kappa(t)=\frac{|\mathbf T'(t)|}{|\mathbf r'(t)|}\qquad\text{where }\mathbf T(t)=\frac{\mathbf r'(t)}{|\mathbf r'(t)|}$$

Meaning: (turning per unit time) $\div$ (distance per unit time).

Example: helix $\mathbf r(t)=\langle\cos t,\ \sin t,\ t\rangle$

$|\mathbf r'(t)|=|\langle-\sin t,\ \cos t,\ 1\rangle|=\sqrt2$ is constant, so $\mathbf T=\tfrac{1}{\sqrt2}\langle-\sin t,\ \cos t,\ 1\rangle$.

$$\mathbf T'=\tfrac{1}{\sqrt2}\langle-\cos t,\ -\sin t,\ 0\rangle,\quad |\mathbf T'|=\tfrac{1}{\sqrt2}\implies\kappa=\frac{1/\sqrt2}{\sqrt2}=\frac12$$

Formula 2: from $\mathbf r'$ and $\mathbf r''$ (no need for $\mathbf T$)

$$\kappa(t)=\frac{|\mathbf r'(t)\times\mathbf r''(t)|}{|\mathbf r'(t)|^3}\qquad\text{for }y=f(x):\ \ \kappa(x)=\frac{|f''(x)|}{\big[1+(f'(x))^2\big]^{3/2}}$$
Why does $\mathbf r'\times\mathbf r''$ give the curvature?

Write $\mathbf r'=v\,\mathbf T$ with $v=|\mathbf r'|$. The product rule gives $\mathbf r''=v'\,\mathbf T+v\,\mathbf T'$.

Since $\mathbf T\times\mathbf T=\mathbf 0$: $\;\mathbf r'\times\mathbf r''=v^2\,(\mathbf T\times\mathbf T')$. Since $\mathbf T\perp\mathbf T'$ and $|\mathbf T|=1$: $\;|\mathbf T\times\mathbf T'|=|\mathbf T'|$.

$$|\mathbf r'\times\mathbf r''|=v^2|\mathbf T'|\implies\kappa=\frac{|\mathbf T'|}{v}=\frac{|\mathbf r'\times\mathbf r''|}{v^3}$$

For $y=f(x)$, use $\mathbf r(x)=\langle x,\,f(x),\,0\rangle$: $\;\mathbf r'=\langle 1,f',0\rangle$, $\mathbf r''=\langle 0,f'',0\rangle$, and $\mathbf r'\times\mathbf r''=\langle 0,0,f''\rangle$.

Example: $\mathbf r(t)=\langle t,\ t^2,\ t^3\rangle$

With $\mathbf r'=\langle 1,\,2t,\,3t^2\rangle$ and $\mathbf r''=\langle 0,\,2,\,6t\rangle$, the cross product is $\mathbf r'\times\mathbf r''=\langle 6t^2,\,-6t,\,2\rangle$:

$$\kappa(t)=\frac{2\sqrt{9t^4+9t^2+1}}{(1+4t^2+9t^4)^{3/2}}$$
Which formula to use? Use Formula 1 when $|\mathbf r'(t)|$ is constant (e.g., circles and helices) or when $\mathbf T(t)$ simplifies nicely. Use Formula 2 when $|\mathbf r'(t)|$ is not constant — differentiating $\mathbf T(t)=\mathbf r'(t)/|\mathbf r'(t)|$ requires a messy quotient rule with a square root, whereas $\mathbf r'\times\mathbf r''$ avoids differentiating $\mathbf T$ entirely. For a 2D graph $y=f(x)$, use $\kappa(x)=\dfrac{|f''(x)|}{[1+(f'(x))^2]^{3/2}}$.
§13.3 · The TNB frame

The $\mathbf T\mathbf N\mathbf B$ frame: a moving coordinate system

Instead of fixed $\mathbf i,\mathbf j,\mathbf k$ axes, attach three mutually perpendicular unit vectors to the moving point $P$ on the curve.

$$\mathbf T(t)=\frac{\mathbf r'(t)}{|\mathbf r'(t)|},\qquad \mathbf N(t)=\frac{\mathbf T'(t)}{|\mathbf T'(t)|},\qquad \mathbf B(t)=\mathbf T(t)\times\mathbf N(t)$$
Tangent $\mathbf T$ (forward)
Unit vector pointing in the direction of motion.
Normal $\mathbf N$ (inward)
Since $|\mathbf T|=1$, $\mathbf T'\perp\mathbf T$ (§13.2). Normalizing $\mathbf T'$ gives $\mathbf N$, pointing toward the inside of the turn.
Binormal $\mathbf B$ (up/side)
$\mathbf B=\mathbf T\times\mathbf N$, perpendicular to both; completes a right-handed frame.
Why is $\mathbf T'(t)\perp\mathbf T(t)$?

Since $\mathbf T(t)$ is a unit vector, $\mathbf T(t)\cdot\mathbf T(t)=|\mathbf T(t)|^2=1$. Differentiate both sides with the dot-product rule:

$$\mathbf T'(t)\cdot\mathbf T(t)+\mathbf T(t)\cdot\mathbf T'(t)=2\,\mathbf T(t)\cdot\mathbf T'(t)=0\implies\mathbf T(t)\cdot\mathbf T'(t)=0$$

Because $\mathbf T$ never changes length, any change $\mathbf T'$ must be purely sideways—perpendicular to $\mathbf T$.

Why do we need the $\mathbf T\mathbf N\mathbf B$ frame?

1. Split acceleration
In §13.4, $\mathbf a=a_T\mathbf T+a_N\mathbf N$: $a_T$ changes the speed, and $a_N$ turns the path toward $\mathbf N$.
2. Turning planes
Osculating plane (spanned by $\mathbf T,\mathbf N$, normal $\mathbf B$): the plane the curve turns in at $P$.
Normal plane (spanned by $\mathbf N,\mathbf B$, normal $\mathbf T$): the plane $\perp$ to the curve at $P$.

Drag to rotate · double-click to reset

§13.4 · Velocity and acceleration

Motion in space: velocity, speed, and acceleration

If $\mathbf r(t)$ is the position of a particle at time $t$, differentiating gives its velocity and acceleration vectors.

$$\mathbf v(t)=\mathbf r'(t),\qquad v(t)=|\mathbf v(t)|=\frac{ds}{dt},\qquad \mathbf a(t)=\mathbf v'(t)=\mathbf r''(t)$$
Velocity $\mathbf v(t)$
Points in the direction of motion; its length is the speed.
Speed $v(t)$
Distance traveled per unit time (what a speedometer shows).
Acceleration $\mathbf a(t)$
Rate of change of velocity: nonzero whenever the speed or the direction changes. By Newton's second law $\mathbf F=m\mathbf a$, it points in the direction of the net force.

Example: $\mathbf r(t)=\big\langle 2\cos t,\ 2\sin t,\ \tfrac12 t^2\big\rangle$

$$\mathbf v(t)=\langle-2\sin t,\ 2\cos t,\ t\rangle,\qquad |\mathbf v(t)|=\sqrt{4+t^2}$$
$$\mathbf a(t)=\langle-2\cos t,\ -2\sin t,\ 1\rangle$$

The inward part $\langle-2\cos t,\,-2\sin t,\,0\rangle$ keeps the particle circling the $z$-axis; the upward part $\langle 0,0,1\rangle$ increases its vertical speed.

Drag to rotate · double-click to reset

§13.4 · Initial-value problems

Finding velocity and position from acceleration

Acceleration plus the initial velocity and position determine the motion: integrate twice, using the initial values to find the constants.

Two-step integration method

$$\mathbf v(t)=\int\mathbf a(t)\,dt+\mathbf C,\qquad \mathbf r(t)=\int\mathbf v(t)\,dt+\mathbf D$$
  1. Find $\mathbf v(t)$: Integrate each component of $\mathbf a(t)$, then plug in $t=t_0$ and match $\mathbf v(t_0)$ to solve for $\mathbf C$.
  2. Find $\mathbf r(t)$: Integrate each component of $\mathbf v(t)$ (including the components of $\mathbf C$), then plug in $t=t_0$ and match $\mathbf r(t_0)$ to solve for $\mathbf D$.
Evaluate every term at $t=0$. $\cos 0=1$ and $e^0=1$, not $0$, so plug $t=0$ into the whole antiderivative before solving for $\mathbf C$ or $\mathbf D$.

Example

Given $\mathbf a(t)=\langle 2,\,-2\sin t,\,2\cos t\rangle$ with $\mathbf v(0)=\langle 1,0,1\rangle$ and $\mathbf r(0)=\langle 0,1,3\rangle$:

  1. Antiderivative of $\mathbf a(t)$: $\;\mathbf v(t)=\langle 2t,\ 2\cos t,\ 2\sin t\rangle+\mathbf C$.
  2. At $t=0$: $\;\langle 0,\,2,\,0\rangle+\mathbf C=\langle 1,\,0,\,1\rangle\implies\mathbf C=\langle 1,\,-2,\,1\rangle$.
    $$\mathbf v(t)=\langle 2t+1,\ 2\cos t-2,\ 2\sin t+1\rangle$$
  3. Antiderivative of $\mathbf v(t)$: $\;\mathbf r(t)=\langle t^2+t,\ 2\sin t-2t,\ -2\cos t+t\rangle+\mathbf D$.
  4. At $t=0$: $\;\langle 0,\,0,\,-2\rangle+\mathbf D=\langle 0,\,1,\,3\rangle\implies\mathbf D=\langle 0,\,1,\,5\rangle$.
    $$\mathbf r(t)=\langle t^2+t,\ 2\sin t-2t+1,\ t-2\cos t+5\rangle$$
§13.4 · Acceleration components

Tangential and normal components of acceleration

Acceleration always lies in the osculating plane and splits into a component along $\mathbf T$ and a component along $\mathbf N$.

$$\mathbf a=a_T\,\mathbf T+a_N\,\mathbf N,\qquad a_T=v'=\frac{\mathbf r'\cdot\mathbf r''}{|\mathbf r'|},\qquad a_N=\kappa v^2=\frac{|\mathbf r'\times\mathbf r''|}{|\mathbf r'|}$$
$a_T=v'$
Rate of change of speed: positive when speeding up, negative when slowing down, $0$ at constant speed.
$a_N=\kappa v^2\ge 0$
Needed to change direction: large on a sharp turn (large $\kappa$) or at high speed (large $v$).
Where do these formulas come from?

Write $\mathbf v=v\mathbf T$ and differentiate: $\;\mathbf a=\mathbf v'=v'\mathbf T+v\mathbf T'$. Since $\kappa=\dfrac{|\mathbf T'|}{v}$ and $\mathbf N=\dfrac{\mathbf T'}{|\mathbf T'|}$, we have $\mathbf T'=\kappa v\mathbf N$, giving $\mathbf a=v'\mathbf T+\kappa v^2\mathbf N$.

Projecting $\mathbf a$ onto $\mathbf T$ gives $a_T=\mathbf a\cdot\mathbf T=\dfrac{\mathbf r''\cdot\mathbf r'}{|\mathbf r'|}$, and substituting $\kappa=\dfrac{|\mathbf r'\times\mathbf r''|}{v^3}$ into $\kappa v^2$ gives $a_N=\dfrac{|\mathbf r'\times\mathbf r''|}{|\mathbf r'|}$.

Both $a_T$ and $a_N$ come directly from $\mathbf r'$ and $\mathbf r''$; there is no need to compute $\mathbf T$ or $\mathbf N$ first.
§13.4 · Acceleration components · Optional

Physical meaning of $a_T$ and $a_N$ Optional

For a car on a road, $a_T$ comes from the gas pedal or the brake, and $a_N$ comes from turning.

Writing $a_N$ with the radius of the turn

Let $\rho=\dfrac1\kappa$ be the radius of the osculating circle. Then $a_N=\kappa v^2=\dfrac{v^2}{\rho}$:

$$\mathbf a=\frac{dv}{dt}\,\mathbf T+\frac{v^2}{\rho}\,\mathbf N$$
$a_T=\dfrac{dv}{dt}$
Changes the speed. It is $0$ when the speed is constant.
$a_N=\dfrac{v^2}{\rho}$
Changes the direction. It is the centripetal acceleration $v^2/r$ of circular motion, using the osculating circle at the current point.
Force
By $\mathbf F=m\mathbf a$, the road must push the car toward the center of the turn with force $mv^2/\rho$ (tire friction). If friction cannot supply it, the car slides outward.

Examples

Situation$a_T$$a_N$Direction of $\mathbf a$
Speeding up, straight road$>0$$0$Forward
Braking, straight road$<0$$0$Backward
Constant speed, curve$0$$>0$Toward the center
Braking in a curve$<0$$>0$Backward and inward

Speed matters most. On a curve of radius $\rho=50$ m, $a_N=\tfrac{20^2}{50}=8$ m/s² at $20$ m/s, but $a_N=\tfrac{40^2}{50}=32$ m/s² at $40$ m/s.

Doubling the speed multiplies $a_N$ by $4$; halving the radius multiplies it by $2$.

Exercises

Practice: arc length, curvature, and motion

Try both problems before checking the step-by-step solutions on the next slides. Give exact answers.

Exercise 1 · Arc length & curvature of a curve

A space curve is given by

$$\mathbf r(t)=\Big\langle 2t,\ t^2,\ \frac13 t^3\Big\rangle,\qquad 0\le t\le 3.$$
  1. Find $\mathbf r'(t)$ and show that its magnitude simplifies to $|\mathbf r'(t)|=t^2+2$.
  2. Find the exact length of the curve over $0\le t\le 3$.
  3. Use $\kappa(t)=\dfrac{|\mathbf r'(t)\times\mathbf r''(t)|}{|\mathbf r'(t)|^3}$ to find the curvature $\kappa(t)$. Is the curvature constant? Where is the curve bent most sharply?

Exercise 2 · Motion from acceleration

A particle moves with acceleration

$$\mathbf a(t)=\langle 6t,\ -\sin t,\ \cos t\rangle$$

and initial conditions $\mathbf v(0)=\langle 1,2,0\rangle$, $\;\mathbf r(0)=\langle 0,3,-1\rangle$.

  1. Find the velocity $\mathbf v(t)$ and position $\mathbf r(t)$ of the particle.
  2. Find the particle's position and speed at $t=\pi$.
  3. Optional Find the tangential and normal components of acceleration, $a_T$ and $a_N$, at $t=0$. What do they say about the motion at $t=0$?
Solution · Exercise 1

Solution 1: arc length and curvature of $\big\langle 2t,\,t^2,\,\tfrac13 t^3\big\rangle$

Watch for perfect squares $(t^2+2)^2=t^4+4t^2+4$ inside the square roots for $|\mathbf r'(t)|$ and $|\mathbf r'(t)\times\mathbf r''(t)|$.

(a) $\mathbf r'(t)=\langle 2,\ 2t,\ t^2\rangle$, and the expression under the radical is a perfect square:

$$|\mathbf r'(t)|=\sqrt{4+4t^2+t^4}=\sqrt{(t^2+2)^2}=t^2+2$$

(b) Integrate $|\mathbf r'(t)|$ from $t=0$ to $t=3$:

$$L=\int_0^3(t^2+2)\,dt=\Big[\frac13 t^3+2t\Big]_0^3=(9+6)-0=15$$

(c) Compute $\mathbf r''(t)=\langle 0,\,2,\,2t\rangle$ and the cross product:

$$\mathbf r'(t)\times\mathbf r''(t)=\begin{vmatrix}\mathbf i&\mathbf j&\mathbf k\\ 2&2t&t^2\\ 0&2&2t\end{vmatrix}=\langle 2t^2,\ -4t,\ 4\rangle=2\langle t^2,\ -2t,\ 2\rangle$$
$$|\mathbf r'(t)\times\mathbf r''(t)|=2\sqrt{t^4+4t^2+4}=2(t^2+2)$$
$$\kappa(t)=\frac{|\mathbf r'(t)\times\mathbf r''(t)|}{|\mathbf r'(t)|^3}=\frac{2(t^2+2)}{(t^2+2)^3}=\frac{2}{(t^2+2)^2}$$

Not constant: sharpest bend at $t=0$ ($\kappa=\tfrac12$), decreasing to $\kappa(3)=\tfrac{2}{121}$.

Drag to rotate · double-click to reset

Solution · Exercise 2

Solution 2: motion from $\mathbf a(t)=\langle 6t,\,-\sin t,\,\cos t\rangle$

Initial velocity $\mathbf v(0)=\langle 1,2,0\rangle$ and initial position $\mathbf r(0)=\langle 0,3,-1\rangle$.

(a) Integrate $\mathbf a(t)$ and evaluate at $t=0$ (note $\cos 0=1$):

$$\begin{aligned}\mathbf v(t)&=\langle 3t^2,\ \cos t,\ \sin t\rangle+\mathbf C\\ \mathbf v(0)&=\langle 0,1,0\rangle+\mathbf C=\langle 1,2,0\rangle\implies\mathbf C=\langle 1,1,0\rangle\end{aligned}$$
$$\mathbf v(t)=\langle 3t^2+1,\ \cos t+1,\ \sin t\rangle$$

Integrate $\mathbf v(t)$ and evaluate at $t=0$ (note $-\cos 0=-1$):

$$\begin{aligned}\mathbf r(t)&=\langle t^3+t,\ \sin t+t,\ -\cos t\rangle+\mathbf D\\ \mathbf r(0)&=\langle 0,0,-1\rangle+\mathbf D=\langle 0,3,-1\rangle\implies\mathbf D=\langle 0,3,0\rangle\end{aligned}$$
$$\mathbf r(t)=\langle t^3+t,\ \sin t+t+3,\ -\cos t\rangle$$

(b) Plug $t=\pi$ into $\mathbf r(t)$ and $\mathbf v(t)$, using $\cos\pi=-1$ and $\sin\pi=0$:

$$\mathbf r(\pi)=\langle\pi^3+\pi,\ \pi+3,\ 1\rangle$$
$$\mathbf v(\pi)=\langle 3\pi^2+1,\ 0,\ 0\rangle\implies |\mathbf v(\pi)|=3\pi^2+1$$

(c) Optional At $t=0$: $\mathbf v(0)=\langle 1,2,0\rangle$, $|\mathbf v(0)|=\sqrt5$, and $\mathbf a(0)=\langle 0,0,1\rangle$.

$$\mathbf v(0)\cdot\mathbf a(0)=0,\qquad \mathbf v(0)\times\mathbf a(0)=\langle 2,-1,0\rangle$$
$$a_T(0)=\frac{0}{\sqrt5}=0,\qquad a_N(0)=\frac{|\langle 2,-1,0\rangle|}{\sqrt5}=\frac{\sqrt5}{\sqrt5}=1$$

$a_T(0)=0$: the speed is momentarily not changing. $a_N(0)=1$: the particle is turning, along an osculating circle of radius $\rho=\dfrac{v^2}{a_N}=\dfrac{5}{1}=5$.

§13.3–13.4 · Summary

Summary: key formulas and methods

§13.3 describes the shape of a curve; §13.4 describes the motion of a particle along it.

ConceptFormula / Method
Arc length (distance traveled)$\displaystyle L=\int_a^b |\mathbf r'(t)|\,dt=\int_a^b\sqrt{[x'(t)]^2+[y'(t)]^2+[z'(t)]^2}\,dt$
Arc length function ($\tfrac{ds}{dt}=$ speed)$\displaystyle s(t)=\int_a^t |\mathbf r'(u)|\,du,\qquad \frac{ds}{dt}=|\mathbf r'(t)|$
Arc length parametrizationSolve $s=s(t)$ for $t$ and substitute into $\mathbf r(t)$; then $|d\mathbf r/ds|=1$
Curvature $\kappa$ (angle turned per unit length)$\kappa=\left|\dfrac{d\mathbf T}{ds}\right|=\dfrac{|\mathbf T'(t)|}{|\mathbf r'(t)|}=\dfrac{|\mathbf r'(t)\times\mathbf r''(t)|}{|\mathbf r'(t)|^3}\quad$ (circle of radius $a$ has $\kappa=\tfrac1a$)
Curvature of $y=f(x)$$\kappa(x)=\dfrac{|f''(x)|}{\big[1+(f'(x))^2\big]^{3/2}},\qquad$ osculating circle radius $\rho=\dfrac{1}{\kappa}$
$\mathbf T\mathbf N\mathbf B$ frame$\mathbf T=\dfrac{\mathbf r'}{|\mathbf r'|},\quad \mathbf N=\dfrac{\mathbf T'}{|\mathbf T'|},\quad \mathbf B=\mathbf T\times\mathbf N\quad$ (osculating plane has normal $\mathbf B$)
Velocity, speed, acceleration$\mathbf v(t)=\mathbf r'(t),\qquad \text{speed }v(t)=|\mathbf v(t)|,\qquad \mathbf a(t)=\mathbf v'(t)=\mathbf r''(t)$
Recover $\mathbf v(t)$ and $\mathbf r(t)$ from $\mathbf a(t)$Integrate componentwise twice; plug in $t=t_0$ after each integral to solve for $\mathbf C$ and $\mathbf D$
$a_T$ (change in speed), $a_N$ (turning)$\mathbf a=a_T\mathbf T+a_N\mathbf N,\qquad a_T=v'=\dfrac{\mathbf r'\cdot\mathbf r''}{|\mathbf r'|},\qquad a_N=\kappa v^2=\dfrac{v^2}{\rho}=\dfrac{|\mathbf r'\times\mathbf r''|}{|\mathbf r'|}$